HomeMy WebLinkAbout243675 . R
` SIGN PROGRAM*
for
MONTEREY SHORE BUSINESS PARK
73-850 / 73-900 / 73-950 / 74-000
DINAH SHORE DRIVE
PALM DESERT, CA 92260
Prepared by: (approved vendor)
Sign-A-Rama
41-945 Boardwalk, Ste. L
Palm Desert, CA 92211
Phone: (760) 776-9907 Fax: (760) 776-9844
E-mail: info@pdsignarama.com
A. INTRODUCTION
The intent of this Sign Program is to provide guidelines necessary to
assure visually appealing signage and achieve a uniform appearance for
the benefit of all tenants. This Sign Program shall be strictly enforced and
any non-conforming signs shall be removed or brought into conformity by
the Tenant or its sign contractor at the Tenant's expense, upon demand
by the Landlord / Association.
B. GENERAL REQUIREMENTS
1 . Each tenant of a multi-tenant building is permitted one (1 ) permanent
sign placed on the front fascia wall of their unit. Tenants occupying
the end units of Buildings 1 and 2 which also have Dinah Shore Drive
frontage may have an additional sign on the Dinah Shore Drive
elevation. Type of sign, color materials, maximum size and location
of tenants' sign are specified herein. (see Attachments 2 thru 6)
Note: Tenants having Federally Registered Trademarks may use
such layouts and colors in their signage.
2. Prior to sign fabrication or installation, Tenant shall submit two (2)
copies (one in full color) of the proposed sign for Landlord's
approval and two (2) copies for Association approval. Drawings
must include sign location, size, layout, design and color, including
all lettering and/or graphics.
Page 1 of 14 3-7-07
x
3. Upon Land0I / Association approval, Ten*shall obtain all
applicable permits from the City prior to sign installation.
4. All costs for signs, installation (including any necessary electrical
service connections) and permits shall be at the sole expense of the
Tenant.
5. Tenant is responsible for fulfillment of all requirements of this Sign
Program,
6. For purposes of secondary business identification, Tenant will be
permitted to place upon glass door at each entrance to its premises
Oyster colored vinyl lettering not to exceed two (2) square feet in
area. Letters shall not exceed three (3) inches in height and copy
shall indicate business name, hours of business, emergency
telephone, etc. The number and letter type shall be Helvetica,
Optima or Helvetica Italic. Additionally the unit or address number
shall be placed on the glass door at the primary entrance in 5" tall
Oyster colored vinyl, Helvetica Bold typestyle. (see Attachment 7)
7. Fear service access doors or employee entrances (as applicable)
may be marked with black or oyster color (to contrast with door color)
vinyl indicating unit number, tenant business name or other
directional information required. Lettering shall be Helvetica. Unit
number shall be four (4) inches tall and remaining copy shall be two
(2) inches tall. Overall area of this copy, excluding unit number shall
be 2 square feet, maximum. No signage may be placed upon roll-up
vehicle access doors.
9. Sign area allowances expressed in this Sign.Program are stated
as maximum. Should the City Sign Ordinance requirements be
more restrictive, the City Sign Ordinance shall apply.
C. GENERAL SPECIFICATIONS
1. No exposed raceway, crossovers, conduits, conductors,
transformers, etc. which are visible when facing building elevation
shall be permitted.
2. All electrical signs (as applicable) and their installation shall comply
with all local building and electrical codes.
Page 2 of 14 3-7-07
` 3. Electricals ice to all signs (as applicable all be connected to
Tenant's electrical service panel.
4. No animated, flashing or audible signs are permitted.
5. Upon removal of any sign, the building or wall surface shall be
patched, textured, sealed and painted to match its original condition,
at Tenant's sole expense.
D. DETAIL REQUIREMENTS, TENANT SIGNS
Tenant signs shall be non-illuminated and shall not exceed a sign
envelope of 30 inches in height x 120 inches in length. Logos are
permissible providing they do not exceed the sign envelope height and do
not comprise more than one-third (1/3) of the overall sign area. A
maximum of two (2) lines of copy is permitted for each sign.
1 . Tenant signs shall be individual dimensional letters, 2 inches thick,
2 lb. density, expanded polystyrene, closed cell foam with brushed
satin anodized aluminum faces and aluminum color texcoated
returns.
2. All signs shall be centered vertically and horizontally on the
wall panel upon which they are placed.
3. Individual dimensional letters shall be attached to the building using
silicone adhesive.
E. DETAIL REQUIREMENTS, BUILDING ADDRESS SIGNS
Each building must have one (1 ) set of illuminated address numerals.
Illuminated address signs shall be reverse (halo-lit) individual aluminum
channel letters, 12 inches tall x 3 inches deep. Illumination shall be #6500
white neon. Exterior letter colors and locations shall be as indicated in
individual Building Sign Elevation Plans (see Attachments 2 thru 6).
All penetrations of the building structure for sign installation shall be
sealed in a watertight condition. All bolts, fasteners and clips exposed to
the weather shall be corrosion resistant (stainless steel, aluminum or
brass) and shall be painted to match adjacent finish.
Page 3 of 14 3-7-07
F. DETAIL UIREMENTS, PRIMAR ENTER
IDENTIFICATION SIGN
At the main entrance to the complex, a double-sided internally illuminated
monument sign identifying the Monterey Shore Business Park may be
erected. The monument sign shall not exceed 5 feet in height nor 10 feet
in width. The design shall be complementary to the architecture of the
complex. (see Attachment 8)
G. DETAIL REQUIREMENTS, SECONDARY CENTER
IDENTIFICATION SIGN
Additional identification signage for the complex shall be placed upon the
east elevation of Building 5 (74-000) facing Interstate 10. The overall area
of the sign shall not exceed 165 square feet. (see Attachments 6 & 9)
1 . Sign shall be individual internally illuminated acrylic-faced channel
letters with ivory color faces and trim. Returns shall be painted to
match the wall upon which they are placed. Illumination shall be
#6500 white neon.
2. Letter depth shall be 5 inches
3. Sign shall be centered vertically and horizontally on the wall
panel upon which it is placed.
4. All penetrations of the building structure for sign installation shall be
sealed in a watertight condition. All bolts, fasteners and clips
exposed to the weather shall be corrosion resistant (stainless steel,
aluminum or brass) and shall be painted to match adjacent finish.
H. SIGN INSTALLATION
The tenant's sign installer will:
1. Provide the Landlord / Association with an original certificate
of insurance naming the Landlord as an additional insured for
liability coverage in the amount of One Million Dollars
($1 ,000,000) prior to beginning sign fabrication.
Page 4 of 14 3-7-07
2. Obtain all r ired sign and building/electripermits from
the City of Palm Desert and deliver copies to the Landlord /
Association before installing the sign(s).
3. Keep a fully approved set of sign drawings on site when
installing the sign(s).
4. Warrant the sign against latent defects in materials and
workmanship for a minimum of one (1) year.
Tenants may obtain pertinent sign specifications and fulfill their leasehold
sign requirements by contacting the Authorized Sign Supplier.
Authorized Sign Supplier:
Sign-A-Rama
41-945 Boardwalk, Ste. L
Palm Desert, CA 92211
Phone: (760) 776-9907 Fax: (760) 776-9844
E-mail: info@pdsignarama.com
ATTACHMENTS 1 THRU 9 FORM A PART
OF THIS SIGN PROGRAM
Page 5 of 14 3-7-07