HomeMy WebLinkAboutWIND18-0011 PERMIT EXPIREDW
City of Palm Desert
PERMIT NUMBER:
ISSUE DATE:
lr" Building and Safety Department
WIND18-0011
21612018
73510 Fred Waring Drive
Palm Desert, CA 92260
Permit Type: WINDOW
Appl, Date: 216/2018
REPLACEMENT
Permit
Appr. Date: 2/6/2018
Subtype:
Exp. Date: 8/5/2018
Job Valuation: $5,000.00
Project Address: 47380 AVENUE JADIDA
Project Description: PERFORMANCE APPROACH
APNITract/Lot No:
Owner:
Contractor:
Applicant:
630360024
VICTORIA R WHITMORE
INDIAN WELLS GLASS &
INDIAN WELLS GLASS &
TR 5904
47380 JADIDAAVE
MIRROR INC
MIRROR INC
24
PALM DESERT CA, 92260
75-080 ST CHARLES PLACE
75-080 ST CHARLES PLACE
SUITE A
SUITE A
PALM DESERT, CA 92211
PALM DESERT, CA 92211
Licensed Contractor Declaration
Fee Summary
I he by affirm under penalty of Chapter 9
Di that I am licensed under previsions
ARCHIVE FEE - 8.5X11 U GL-11000003411600 $1.26
) of
mmencing with Section 7000) of Division 3 of the Business and Professions Cade,
io ode
and my license is in full force and effect,
OF
ARCHIVE FEE - PLAN GL-11000DO-3411500 $0.80
itial
GREEN BLDG FEE 47 GL-6100000-2281000 $4.00
MINIMUM INS P 0 GL-11000D0.3221100 $159.00
Owner -Builder Declaration
O1
hereby affirm under penalty of pedury that I am exempt from the Contractors' State
PERMIT ISSUA F GL-11000DO-3411400 $105.00
License law forthe reason(s) indicated below by the checkmark(s) I have placed next
Total al $270.06
10 the applicable item(s) Section 7031.5 Business and Professions Code: Any city or
1 he y nder the penakyef perjury that there !s a construction lending agency for rile
county which requires a permit to construct, alter, improve, demolish, or repair any
structure, prior t0 Issuance, also requires the applicant for the permit to file a signed
Perfio a ofthe work for which this permit is issued (See 3097, Civil Code)
statement that he or she is licensed pursuant to the provisions of the Contractors' State
Lefiftame and address
License Law(Chapter 9(commencing with Section 7000) of Div sion 3 of the
and Professions Code) or that he or sheis exempt and the basis for the alleged
Asbestos Declaration
exemption.Any violation of Section 7031.5 by any applicant for a permit subjectsapplicant
to a rNl penalty of not more than five hundred dollars ($500).)bestos
notification pursuant to Part 61 of Title 40 of the Code of Federal Regulations Is required
Fasebmeostos,
I, as owner of the property, or my employees with wages as their sole cornpensaestos
exists in buildings, or portions thereof, undergoing demolition. I hereby declare that
will tlo the work, and the structure is not intended or offered Tor sale (Sea 7044,
authorized by this permit is from construction that does or does not contain
Business and Professlons Code:'The Contractors' State License Law does not a
or Ihat no demolition is authorized by this permit
an ownerof property who builds or improves the property, provided that the
improvements are not untended for sale. If, however, the bending
NOTICE: You may protest any of the fees for this permit in accordance with CA Gov Code Sec. 66020
yeor ar have the
a
improvement is sold within one year of eomplefiof the ppurpos uof
(a). The protest must satisfy the requirements of Gov. Code Sec.66020(a) and must be filed within 90
burden of proving that it was not built or improved for the purpose of safe.]
salder e.)
days of the date of this notice. In addition, you must lender payment of the protested fees at the Pimp of
the payment or provide evidence of arrangements to pay the protested fees or exactions at the time they
I, as owner of the property, am exclusively contracting with licensed contractors to
are due if they are not already due.
construct the project (Sec. 7044, Business and Professions Code: Tne Contractor's
License Law does not apply to an owner of property who builds or improves thereon,
and who contracts for such projects with a licensed contractor pursuant to the
Contractors' State License Law.)
t am exempt from Licensure under the Contractors' State License Law for the
following reason:
Date/Signature of property owner or agent
ytforkers' Compensation Declaration
WARNING: FAILURE 70 SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL AND SHALL
SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CML FINES UP TO ONE HUNDRED THOUSAND
DOLLARS ($100,000), IN ADDITION TO THE COST OF COMPENSATION DAMAGES AS PROVIDED FOR IN
SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATfORNErS FEES.
I hereby affirm under the Penalty of penury ONE of the following declarations:
I have and will maintain a certificate of consent to self -insure for workers'
compensation, issued by the Director of Industrial Relations as provided for by Section
I[--
Initial
3700 of the Labor Code, forthe performance of the work forwhich this permit issued.
Policy No.
I have and will maintain workers' compensation insurance, as required by Section
3700 of the Labor Code, for the performance of the work forwhich this permit is
Issued. My workers' compensation insurance carter and policy number are:
_
Initial
Carrier & Policy Number
Expiration Date
I certify that in the performance of the work f which thi ps'teaertnl, t is issued, I shall not
employ any person in any manner so as to ecorne,s ject to the workers'
compensation laws of California and ague that iy1's uld me ubjeet to the
workers compensation provisuons of $a ion qD f lh a hall forthwith
comply with
j�those provisions. _
Date!�_ Applicant
_
Initial
City of Palm Desert
Department of Building and Safety
Building Permit Application
(For Office Use only) i
JOB ID: Y`►1���
PLANS FILED:
Project Address: '47 39( _TKi n ffie Suite #
Total Value of work: $ 5,000, 40 Note: Plan Review Fees may be adjusted after Plan Review
Project Description (be specific):
Contractor Business Name �t
r �!ej, Lst i r rti1it
Property Owner Name
Address
�
Address
City *� f zip- I
"i l /
CISy
Zip
Phone ,-` l�
Phone
Fax y.�_ .�
ALI
Fax
E-mail
4�� C
I
9 l��Y
E-mail
�r
: r
Contractor License No.
❑Architect Name ❑Designer Name
Engineer Name
Address
Address
City Zip
City
Zip
Phone
Phone
Fax z
Fax
E-mail
E-mail
License No.
License No.
Applicant Name
Signature
Date
. . ' .Dfnr\ Gl-e-�_i5
_ .
.
Contact Telephone Number
E-Mail
-7bo 59%
QAa� LA&S ') CO 4"
PLEASE COMPLETE THE REVERSE SIDE
73-510 Fred Waring Drive, Palm Desert, CA 92260 • (760) 776-6420 • (760) 776-6392 fax • www.cltyofpalmdesert.org
A IND) t-o�11
BUILDING ENERGY ANALYSIS REPORT
PROJECT:
Remodel Residence
47380 Jadida Ave
Palm Desert, CA 92211
Project Designer:
Indian Wells Mirror and Glass
75-080 St Charles Place STE A
Palm Desert, CA 92211
(760) 779-0340
Report Prepared by:
Jon d. Scott
Scott Design and Title 24, Inc,
74818 Velie Way Suite 8
Palm Desert, CA 92260
760-200-4780
Job Number:
Date:
1 /25/2018
APPROVED
CITY OF PALM DESERT
BUILDING & SAFETY DEPART
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is
authorized by the California Energy Commission for use with both the Residential and Nonresidential 2016 Building Energy Efficiency Standards.
This program developed by EnergySoft Software—www.energysoft.com.
y
I TABLE OF CONTENTS
Cover Page
Table of Contents
Form CF-1 R-PRF-01-E Certificate of Compliance
Form RMS-1 Residential Measures Summary
Form MF-1 R Mandatory Measures Summary
EnergyPro 7.2 by EnergySoR Job Number: ID: User Number: 6712
1
2
3
9
10
LL
i
t
a
u
c u
r s
L
cq
N P
C
m `[
0
3
_C C
N
C.N. N
La
a
_
C
P
w 0
(C
C �
o c
u
t
C)
N
4.
v?
O
O
M
Cf
h
^O
O
N
N
N
C
�
CD
CL
�
ti
T
21
0
O
U
z
LU
m
C
w
CDy
W—
ig
c
R
w
U)
pC
bl
r2
N
U
_
{m
j
1p
N
is
a
`m
QI
O
w
m
,.w
M
0s
Q�
O
`
E
cn
c
w
Q1
,�
0
0
y
L
a
5
z
O
10
�
N
[9
o_
d
t�61v
U
Li
C
O
E
o
z
U
o
Li
Vf
A
r
M
N
t~
O1
r
CD
CDM
r
v
N
C
O
N
y
Q
a
y
N
m
O
E
N
of
7
Co
't
N
a)
F-r'.
¢
lC
a
m
7
W
y
0.
rn
U
T
—
N
LL
47
ar
C�
0
a
W
C
4
o
0
E
o
°
V
o
o
a
o
N
N
N
N
tv
z°
c
•o
a
v
c
O
'�
a
_v
16
U
0
w
p
a
U
0
N
N
w
E
_
U
rn
a
m
N
0
tl
w
a
o
-o
U
m
d
a
.0
N
L
a
.i
•d
c
0
d
a
s
N
c
o
Q
z
O
',na
O
a
a
0
LL
z_
J
Z
w
N
M
tp
Op
O
N
'd
�D
OO
O
C7
0
G!
C
0
r
m
N
w
O d
LL
CJ 0 {d
U
tra-
A
� V
CD LY O
a w E
S 0
£ d O
0 N
F- m
z o
CL
,n tNu `0
O L
a O
U e c
'ro ii
C
F A N N
J GR H H
O
w
w
tt
w
z
Q O O O
W
0-
2
0
U
s
G7
N
0
0
p
o
0
0
0
p
r
O
O
i
w
y7
V
O
C.
co
C
d
i
IL
c
ro
a)
fr
U
a!
O
O
O
r
C,
N
O
O
O
O
00
0
U
_
O
0
0
_
CR
p
�L'f
O
O
a
NO3
O
N
G
O
N
0
N
t1
Lll
N
}
C7
it
w
S
Lu
c
M
to
Lo
O
l0
w
Ci
O
to
L
N
N
_
a
N
�
f
=
C
O
C
p1
.O
.R
O
t
ro
41
m
0
-
m
=
w
O
v
m
O
7
C!
$
A
t o
N
Q
'a
r
C
a
c
LU
U
N
E
cu
D
.6
'or
N
Of
N
Ll.
Cn
O
I+
O
N
N
iC
LL
U
C
O
i
0
0
0_
N
Of
l!!
U
z
a
a_
2
0
U
LL
0
LLI
U
U.
p
Of
w
U
00
co
C
U
N N
n m
a
a
D =
1 O
O }
E a
(D
a m
d
o
mC
z °
U @
O O
aL 0
(u
'O
cc
°
a
Q
c
a�
C
o_
E
8
L
w
E
aL
Q
L
N
0
-
aas
D
O
E
m
c
ED
CD
c
0
C
O
U
(a
cn
N
fy
LL
x
CD
CD
w
a)
U
l6
O
a)
7
ti
a)
G
a)
E o
L �
y y
O N
N G
= O
17
O W
6
to
�
U w
w c
•0 7
y
=
"s o
E m
� C +0+
y
� 3
am au m
tL
ob
Otr Mao cw• C
p O
c 0.5 O O (n O
z z U z d z
x
F=- n
M U M. q.
N
y
7 in
y
f`
C fh
N
o
L
of
-
.a e
E m
v
m
m
3
O y
•la
N
ID
C
N
cm
0
a1
y
•O
0
im
m
2
Y
L
3
a1
C
o
y c
N
o
ti a
M
o
0)
d
a.0
E
z
a
VJ
O
r
U.
a
m
p
00
(�
o
N
G
d
E
z
y
E
M
c
R
z
t—
m
3
Q
o
N
c
c=
r
N
:c
d�
a
Z
3
N
L
a
C)LL
L
°
i
Q7
Q
'd
m
C
o
a
C
v
C
a
C
O
O
N
O
U
v
o
0
F
v
0
LL
zLU
U
as
zo
m
(Dz
0
�
F
(Ev
�
w
c
m
y
N
z
0�
z
a
W
z
ro
N
C C
O
z
z
z
z
z
z
� W O
V
y
CS]
C
.N
of
C
C]
C
tw)
C
W
C
U)
C
QI
N
N
•N
N
.N
w
w
w
w
w
w
co
.. zM
F�
w
rn
rn
rn
0
O
O ci
3
,D
Co.
ao
(D
M
0)
0
O `
M
N
M
c a
H
CDa
dto
0
LO�
0
ID
LO�
CD
co
N
y
y
V
_
0
y
m
M
J
C'
.e
°
co
rl.
N
C*
7
0
H
M
0
y
M
M
.-
CO
�
V)
r•
V
�
C
O
g
�
col
No
C
C
C
C
C
C
o
M
•'a0
b
2
a
N
N
of
W
Of
N
w
N
Ix
w
N
cl�
cn
CW7
CD
Clz
o
CO
z
w
tin
N
c
a
O
r-
N
m
N
47
N
O
C6
n
N
N �
� a7
> C
O m
a` �
a
CL w
x C�
a)
E
3
z
C
0
N
N
a
(D
O
0
N
N
L.L
U
C
0
.y
C
Q
(D
N
T
C
U Q
N N
;O Qy
N :;:3
� C
a O
O
rC •O.
L
4' y
ai p
MC
z
m �
•� U
a U
N C
X .O-+
o Lu •- Z
a- i7 C
m D
`E U
N �
N
CO V 0 Z
C L
n T o
CP o z
a' m
m
to,ao e O v W
C.
W
v
O w
0 0 0 o
CD
0
co)
a o
d N
to C1 O
O F C
N
U
G G
O a
u cn
N L N
O
N O
O
O �
U U
Q
d �
r N
o ro v
z �
U
U
a
� C O
O
U
N
a
a
t7
'v
a
a
v
a
a
a
a
a
a
a
a
N
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
7
O
7
7
O
3
75
O
7
7
7
O
75
7
7
N
O
Q]
O
N
N
N
C)
N
N
d
O
N
v
d
L
G
C
G
C
C
C
C
C
C
C
C
G
G
C
C
p
L
L1
N
N
N
`o
N
�
d
N
N
N
2
N
2
N
o
c`'i
X
V
U
U
U
U
U
W
U
41
U
0
U
N
U
CU
0
W
w
(U
U
(U
U
N
U
O
N
C
N
C
N
G
N
C
N
C
N
C
N
C
N
C
N
C
N
C
N
C
N
C
N
C
i7
C
N
C
co
M
N
M
N
M
N
M
N
M
N
M
N
M
N
m
N
n
N
Cl)
N
M
N
M
N
M
N
M
N
fi'1
N
=
h
C
O
0
Q
C7
CD
CD
O
O
O
(D
O
C.
0
0
p
O
u]
O
�C'1
O
CC1
00
eY
V
r
V
O
Lq
r
r
O
Y
o]
w
C7
O
C]
CD
C7
O
O
a
0
0
O
O
C)
CD
G
t0
N
'
O
O
O
CD
O
O
O
r
Y7
O
co
co
O
O
O
O
4
p
R
i
O
co
"r
N
V
O
N
O
O
CD
Qj
O
M
N
N
O
M
Q
M
CV
a
L
a
o
3
o
'a
S
L
3
M
M
M_
o
O
4
rn
rn
rn
rn
rn
I
I
t
N
N
N
Q
m
ro
N
C.
G.
O
C
O
X
G777
X
N
X
N
X
U777
X
N
X
O]
X
a)
X
(U
N
y
y
X
X
N
X
N
X
N
7N
Z
'Z
Z
W
W
W
W
W
0
2
0
W
0
co
M
Z
J
O
4
N
O
h
ti
LS'J
O
A
N
N
lC1
N
O
N
X
coo
K
co
X
x
X
X
x?
CD
X
X
X
d'
D
cD
lfJ
o
Z
ait
Z
Z
Z
Z
z
Z
Z
Z
Z
z
Z
Z
Z
Z
W
LL
r-
N
m
N
r
CV
O
C6
0
N
m
'o
(U
C) �
N
2
a �
n
W N
U}
m
E
3
z
0
E
m
w,
0
F
LU
2
LU
U
z
a
J
a
0
U
W
U
z
a
0
LL
0.'
LU
a
00
O
N
L
N
C
m
H
C6
N
LO
4;
E
a
c9
❑
C
R
3
U
R
U
U
c
Q7
'CS
N
N
Ul
0
E
a�
4i
E
0
z
r
U
N
a
b1
C
U
a
UZ2m
61
2
►- w c'
y
?( ate+
5
b C
12 V
0
xC13
�+Nym
R
\\c
roves
o xrn
ro�
o k
mNE
o\ a
c
}
a ,t 0
C�
a
y
y ai
Z3F o
y U
a c�
y
]+ct C,
N
Q
h
h
UQ U
tL
O
fi le
CIT
`�
q c
U
o
U�C?f
UW
tU0
C
C7
co
'y L
O
oa o
v
m
a
n
w'.
O
C
4
O
N
O
y
a
of
co
U is
w
c
c
c
K
of
H
7
�N1
L
N
a
U
U
CU
O
O
O
C
c
0
oLj
c
c
c
c
E
O
io
io
`
a
o
O
U
v
N
v
!
v
c.
f
tV
x
rn
rn
U
U
c
O
n
U7
GS
(U
cu
o
u
E
E
E
lL
LL
N
'a
e`
O
O
0
0
U
a
0
iCL o
cu
w
9
a
9
N
CD
O
Of
a U
m�
`s
z
O
N
¢
U
w
c
F
U
F
z
0
d
E
U
w
R
z
�
CY
U
O
a
0
a
O
a
_ w
" N Y3
z
jlj o
U
y
3
C
O
R
W
O
r
�
O
z
Y
ro c
a
�. O
�p
p
Gf i+
0.
00
p
U tL
a
�
m
�
�
H
o
z
c
a
rn
w
a
a
E
co
v
a
�
r
T
Q
0
0
N
x
a
a
.o
`O
R
o
z
}
N
o
0
d
Lt.
m
y a
'x y
w
w •-
z
O
C
O
U
�
G
C
x
N
L11
w
C
C
O a
O
w
O
L
o
a
r
E a
z
w
R
4
6
a
aa)
=
a
y9
3
Q
rn
c
'a
a
F�'
d
c
m
�
o
a
a
U)N
m
_
91
U
m
a
H
`V
a
E
x
A
N
N
N
w
E••
�
r
N
a
yam,
a
z
w
p
T
Fw-•
r
N
m
N
r
U'7
N
O
W
O
N
CD
� y
y0 N
a` (LD
co EY O
w aa)
r
C
C C
�p m O
U,
Q C
a
r
a
a
7
4 p
R �
R
T
a
i
C
L
w LA
z
7� aa+
R
T
�
0
W lL
rn
M N
N
aC
a u W
J
a
� Q'
G _
Y 7 �(
co
cO R R LU
O
L
o €pci
m
o=
Z
CD
aa�w
a
C
a
7+IJ
mer
ID
L C .t_i
ww
1L
w
c
E —
—
CR
L ti
0-
U Q
0
w
7 U. R
LL
a
Y
C
02
Lo
O
E
z W
z O
a
a
CD
tm
2
M
p
O
U)
O
Y
C
E
O a Q
N
N
{p 9L
CD d
R
c�
r
N
a
T
F
aD
a
R
m
z
o
z
H
m
a
Q
C
N C
x
w
LU ea
o
6
CO
z
N
7
�
O
w
_
O
L
p
3°J
�E
N
�
Q
d
�
N
o
R
Z
=
LL
Q
m
5
a
r
N
m
Z
G
0
o
c
E
0
C
01
C_
O
0
U
O
0
U
a
^=
T
C
R
Z
N
C
L
0.
E
o
VcN
C
tm
G
a
z
a
=
01
G
O
0
U
a
O
E
cp N
Y
C 7+
LO
fA
=
N
a
w
O
}
}
C7
z
m
z
O
E
1=
m
Z
Cj
O
z
o
N
o
5
U
N
LU
U
a
N
C
O
(n f9
o
T
W
R
Cf
L
= N
% L
0)
111
O
o
Z
U
N
ty)
co
O
N
aR+
co
C7
�
N
c
A
Q
z
7.
m
o =
3
� �
U
O
C R
� u
O
V
� C
� �
U
LO
c
?+ R
° o
a
7 J
y
O a
N
0
0
v
N a.
C
a
c
R
o
C .^0
O
J
C N
x
w N
O
U
7a
C �
�
O
O
W
N
—
C
>G
U
()
}
v=
z
0
F-
00
0
CD
Q E
N
z
O T
�
U
x
C
0
w 'c
of 'C cr
O ; �
w
to
N
CD
a
G
d
U
a
O W
CD
9
O
U
a
a
Ci
a
0.
p =
In C w
O W N
C� o
a
LL
LL
N (] �
a
z
W G
a
r (�
• C R
c z E
sh a
c LL
V)
LO
O
v
a
n
N
N
LO
N
O
a2
O
N
m
r
N E2
a)
7 C
Q
co V-
4
W N
Of
m
a
z
C
O
m
N
W
r CO
LL o
CC to
a a
eQ
LL a
U
co
0
N
La
N
C
ca
C
N
LO
E
t
r
C
O
Cd
7
c�
U
0
'O N
U y
R E
E U
w °
'O
U
ar a
s `9
CL
a E
U
c
R
a R
-a n
m
c
R
r 1
\J
E a L
a
o
Ql.
0 N c0
m 2 a
CL
a
�
N
° ,
r- ca O C
c
a o n c
U m
�J
C
ti 41 E O U
Ql l0 �
1
•��
�a
d
° � N
a =,
O
rnco
Co
r
GO
ti
`-
a
m
co
O
Coo
v_ a
t
.0
C)c
_
w
ti
try
w
0
N
ti
a
CD s-
m
o cai y !°
M
CD
C
CDd'
G U
C
v
R
ZZ
C
N !0
Q
r
C
o
rn
LLI
•"
in
U
a
o
o
-
a
�a, a
m E o
0
c0° cmcn ' m R
ai
is a o
Ql
U p 47
CL
o U a U U47
w- R N N
U Ca
a
. o o CD
o a
WR
o
U
N N 41 U
U
W
LU
C
°
�-
o. y
� a. N
W
~
m
Z
W
fL -p a.)00 N
c r- _
N
W
carnR
co
) E '
cn
co
�
Q0
00
0
rrco
V
rrw
LC
'6
N
C)
O
Q
�' f9 VT7 R
c.
-0
C)
M.
N
fY
O N N
.'" °
C
cc
E:
04
0
E-
O
V
boy �n
O
O
N
O
0
Q
W
d y G
�
Q
O
GY
N
�
C. o
l6
d2
2
m
�..�
=
U
R
'�''
Y)
Z
C
N N 0 7
N Ui
(n
Q
Z
•fl%
o
U
Z=
_
Qi
to
0O
U
w
V)
❑
>
QI
❑
W
UI
FaR
C�
rn
O
N
❑
00
on-�
o
co
en
?. v!
Z
s
E
R
a
w
R
in
0
a
O
(6
cs
w
m
R
U)
O
a
o
w
V N
w
E
ro
O
0
0
4
U
w
w
U
Q
U
aN.
0
CN
bi
N
E
LL
� U
0 �
� o
C N
C,
m
2
OI C]
ct CE
RESIDENTIAL MEASURES SUMMARY
RMS-1
Project Name
Remodel Residence
Building Type
m Single Family ❑ Addition Alone I
❑ Multi Family ® Existing+Addition/Alteration 1112512018
Date
Project Address
47380 Jadida Ave Palm Desert
California Energy Climate Zone Total Cond. Floor Area
CA Climate Zone 15 1,971
Addition
0
# of Units
1
INSULATION
Construction Type
Cavity
Area
(fie Special Features Status
Roof Wood Framed Attic
R 11
1,971 Existing
Way Wood Framed
R 13
1,294 Existing
Door Opaque Door
- no insulation
54 Existing
Slab Unheated Slab -on -Grade
-
no insulation
1,971 Perim = 180' Existing
Demising Wood Framed
- no insulation
288 Existing
FENESTRATION
Orientation Area ftz
I Total Area: 652 Glazing Percentage: 33.1 Vo New/Altered Average U-Factor: 0.48
U-Fac SHGC Overhang Sidefins Exterior Shades Status
Rear (N) 350.0
0.500
0.23 none
none Bug Screen Altered
Right (E) 24.0
0.480
0.25 none
none Bug Screen Altered
Right (E) 44.6
0.410
0.23 none
none Bug Screen Altered
Right (E) 60.0
0.500
0.23 none
none Bug Screen Altered
Right (SE) 19.6
0.410
0.23 none
none Bug Screen Altered
Right (SE) 60.0
0.500
0.23 none
none Bug Screen Altered
Left (W) 82.0
0.410
0.23 none
none Bug Screen Altered
Left (M 12.0
0.480
0.25 none
none Bug Screen Altered
HVAC SYSTEMS
Qty. Heating
Min. Eff
Cooling
Min. Eff Thermostat Status
i Central Furnace
80% AFUE
Split Air Conditioner 12.0 SEER Setback
Existing
HVAC DISTRIBUTION
Location Heating
Cooling
Duct
Duct Location R-Value Status
HVAC Ducted
Ducted
Attic 4.2
Existing
WATER HEATING
Qty. Type
Gallons Min. Eff Distribution Status
EnerqyPro 7.2 by EnerqvSoft User plumber: 6712
1D:
Pa e 9 of i3
Al
2016 Low -Rise Residential Mandatory Measures Summary
NOTE: Low-rise residential buildings subject to the Energy Standards must comply with all applicable mandatory measures, regardless of the compliance approach
used. Review the respective section for more information. 'Exceptions may apply.
fOriainal 0812016)
Building Envelope Measures:
§ 110.6(a)i:
Air Leakage. Manufactured fenestration, exterior doors, and exterior pet doors must limit air leakage to 0.3 cfmlft' or less when tested per
NFRC-400 orASTM E283 orAAMAIWDMAICSA 10111.S.2tA440.2011.'
§ 110.6(a)5:
Labeling. Fenestration products must have a label meeting the requirements of § 10-111(a).
§ 110.6(b):
Field fabricated exterior doors and fenestration products must use U-factors and solar heat gain coefficient (SHGC) values from TABLES
i 10.6-A and 110.E-B far com Iianae and must be caulked and/or weatherstri ed.'
§ 110,7:
Air Leakage. All joints, penetrations, and other openings in the building envelope that are potential sources of air leakage must be caulked,
asketed or weather stri pad.
§ 110,8(a):
Insulation Certification by Manufacturers. Insulation specified or installed must meet Standards for Insulating Material.
§ 110.8(g):
Insulation Requirements for Heated Slab Floors. Heated slab floors must be insulated per the requirements of § 110.8(g).
§ 110 8(i):
Roofing Products Solar Reflectance and Thermal Emittance. The thermal emittance and aged solar reflectance values of the roofing
material must meet the requirements of § 110.8 i when the installation of a cool roof is specified on the CF1 R.
§ 110.80):
Radiant Barrier. A radiant barrier must have an emittance of 0.05 or less and be certified to the Department of Consumer Affairs.
Ceiling and Rafter Roof Insulation. Minimum R-22 insulation in wood -frame ceiling; or the weighted average U-factor must not exceed 0.043.
Minimum R-19 or weighted average U-factor of 0.054 or less in a rafter roof alteration. Attic access doors must have permanently attached
§ 150.0(a):
insulation using adhesive or mechanical fasteners. The attic access must be gasketed to prevent air leakage. Insulation must be installed in
direct contact with a continuous roof or ceiling which is sealed to limit infiltration and exfiltration as specified in § 110.7, including but not limited
to placing insulation either above or below the roof deck or on top of a drywall ceilin '
§ 150.0(b):
Loose -fail Insulation. Loose fill insulation must meet the manufacturer's required density for the labeled R-value.
Wall Insulation. Minimum R-13 insulation in 2x4 inch wood framing wall or have a U-factor of 0.102 or less (R-19 in 2x6 or U-factor of 0.074 or
§ 150,0(c):
less). Opaque non -framed assemblies must have an overall assembly U-factor not exceeding 0.102, equivalent to an installed value of R-13 in a
wood framed assembly.'
§ 150.0(d):
Raised -Floor Insulation. Minimum R-19 insulation in raised wood framed floor or 0.037 maximum U-factor.'
§ 150,0(f}:
Slab Edge Insulation. Slab edge insulation must meet all of the following: have a water absorption rate, for the insulation material alone without
facings, no greater than 0.3%; have a water vapor permeance no greater than 2.0 perm/inch: be protected from physical damage and UV light
deterioration; and, when installed as part of a heated slab floor, meet the requirements of § 11 0.8.
§ 150.D(g}i:
Vapor Retarder. In Climate Zones 1-16. the earth floor of unvented crawl space must be covered with a Class I or Class II vapor retarder. This
requirement also applies to controlled ventilation crawls ace for buildings complying with the exception to § 150.0(d).
§ 150.0(g)2:
Vapor Retarder. In Climate Zones 14 and 16, a Class I or Class 11 vapor retarder must be installed on the conditioned space side of all
insulation in all exterior walls, vented attics, and unvented attics with air -permeable insulation.
150.0
§ (q)'
Fenestration Products. Fenestration, including skylights, separating conditioned space from unconditioned space or outdoors must have a
maximum U-factor of 0.58, or the weighted averse U-factor of all fenestration must not exceed 0.58.'
Fireplaces, Decorative Gas Appliances, and Gas Log Measures:
§ 150.0(e)1A:
Closable Doors. Masonry or factory -built fireplaces must have a closable metal or glass door covering the entire opening of the firebox.
§ 150.0(e)1B:
Combustion Intake. Masonry or factory -built fireplaces must have a combustion outside air intake, which is at least six square inches in area
and is equipped with a readily accessible, operable, and tight -fitting damper or combustion -air control device'
§ 150.0(e)1 C:
Flue Damper. Masonry or factory -built fireplaces must have a flue damper with a readily accessible control.'
§ 150.0(e)2:
Pilot Light, Continuous burning pilot lights and the use of indoor air far cooling a firebox jacket, when that indoor air is vented to the outside of
the building, are prohibited.
Space Conditioning, Water Heating, and Plumbing System Measures:
§ 110.0-§ 110.3:
Certification, Heating, ventilation and air conditioning (HVAC) equipment, water heaters, showerheads, faucets, and all other regulated
appliances must be certified by the manufacturer to the Energy Commission.'
§ 110.2(a):
HVAC Efficiency. Equipment must meet the applicable efficiency requirements in TABLE 110.2-A through TABLE 110.2-K.'
Controls for Heat Pumps with Supplementary Electric Resistance Heaters. Heat pumps with supplementary electric resistance heaters
§ 110 2(b):
must have controls that prevent supplementary heater operation when the heating load can be met by the heat pump alone; and in which the
cut -on temperature for compression heating is higher than the cut -on temperature for supplementary heating, and the cut-off temperature for
compression heating is higher than the cut-off temperature for supplementary heating.'
§ 110.2(c):
Thermostats. All unitary heating or cooling systems not controlled by a central energy management control system (EMCS) must have a
setback thermostat.'
Water Heating Recirculation Loops Serving Multiple Dwelling Units. Water heating recirculation loops serving multiple dwelling units must
§ 110.3(c)5;
meet the air release valve, backflow prevention, pump priming, pump isolation valve, and recirculation loop connection requirements of §
110.3(c)5.
§ 110.3(c)7;
Isolation Valves. Instantaneous water heaters with an input rating greater than 6.8 kBTUihr (2 kW) must have isolation valves with hose bibbs
or other fittings on both cold water and hot water lines of water heating systems to allow for water tank flushing when the valves are closed.
§ 110 5:
Pilot Lights. Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces; household cooking appliances (appli-
ances without an electrieal supply voltage connection with pilot lights that consume less than 150 Btulhr are exempt); and pool and spa heaters.'
Building Cooling and Heating Loads. Heating and/or cooling loads are calculated in accordance with ASHRAE Handbook, Equipment
§ 150.0(h)l :
Volume, Applications Volume, and Fundamentals Volume; SMACNA Residential Comfort System Installation Standards Manual; or ACCA
Manual J using desi n conditions specified in § 150.0(h)2.
f
of u
2016 Low -Rise Residential Mandatory Measures Summary
§ 150.0(h)3A:
Ciearances. Installed air conditioner and heat pump outdoor condensing units must have a clearance of at least 5 feet from the outlet of any
dryer vent.
§ 150,0(h)3B:
Liquid Line Drier. Installed air conditioner and heat pump systems must be equipped with liquid line filter driers if required, as specified by
manufacturer's instructions.
§ 150.00)1:
Storage Tank Insulation. Unfired hot water tanks, such as storage tanks and backup storage tanks for solar wafer -heating systems, must have
R-12 external insulation or R-16 internal insulation where the internal insulation R-value is indicated on the exterior of the tank.
Water piping and cooling system line insulation. Far domestic hat water system piping, whether buried or unburied, all of the following must
be insulated according to the requirements of TABLE 120.3-A: the first 5 feet of hot and cold water pipes from the storage tank; all piping with a
§ 150.0q)2A:
nominal diameter of 314 inch or larger; all piping associated with a domestic hot water recirculation system regardless of the pipe diameter;
piping from the heating source to storage tank or between tanks; piping buried below grade; and all hot water pipes from the heating source to
kitchen fixtures.'
§ 150.0Q)2B:
water piping and cooling system line insulation. All domestic hot water pipes that are buried below grade must be installed in a water proof
and non -crushable casing or sleeve.'
§ 150.0(jJ2C:
Water piping and cooling system line insulation. Pipe for cooling system lines must be insulated as specified in § 150.0(j)2A. Distribution
piping for steam and h dronic heating systems or hot waters stems must meet the requirements in TABLE 120.3-A.'
§ 150.00}3:
Insulation Protection. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind.
Insulation Protection. Insulation exposed to weather must be installed with a cover suitable for outdoor service. For example, protected by
§ 150.00)3A:
aluminum, sheet metal, painted canvas, or plastic cover. The cover must be water retardant and provide shielding from solar radiation that can
cause degradation of the material.
§ 150.Q(j}36:
Insulation Protection. Insulation covering chilled water piping and refrigerant suction piping located outside the conditioned space must have a
Class I or Class I I vapor retarder.
Gas or Propane Systems. Systems using gas or propane water heaters to serve individual dwelling units must include all of the following: a
§ 150.D(n}1:
120V electrical receptacle within 3 feet of the water heater, a Category III or IV vent, or a Type B vent with straight pipe between the outside
termination and the space where the water heater is installed; a condensate drain that is no more than 2 inches higher than the base of the
water heater, and allows natural draining without pump assistance; and a gas supply line with a capacity of at least 200,000 Btulhr.
§ 150.0(n)2:
Recirculating Loops. Recirculating loops serving multiple dwelling units must meet the requirements of § 110.3(c)5.
§ 150.0(n)3:
Solar Water -heating Systems. Solar water -heating systems and collectors must be certified and rated by the Solar Rating and Certification
Corporation SRCC or by a listi n2 a2enoy that is approved by the Executive Director.
Ducts and Fans Measures;
§ 110.8(d)3:
Ducts. Insulation installed on an existing space -conditioning duct must comply with § 604.0 of the California Mechanical Code (CMC), If a
contractor installs the insulation, the contractor must certify to the customer, in writing, that the insulation meets this requirement,
CMC Compliance. All air -distribution system ducts and plenums must be installed, sealed, and insulated to meet the requirements of CMC
§§ 601.0, 602.0, 603.0, 604.0, 605.0 and ANSIISMACNA-006-2006 HVAC Duct Construction Standards Metal and Flexible 3rd Edition. Portions
of supply -air and return -air ducts and plenums must be insulated to a minimum installed level of R-6.0 (or higher if required by CMC § 605.0) or
a minimum installed level of R4,2 when entirely in conditioned space as confirmed through field verification and diagnostic testing
§ 150.0(m)l:
(RA3.1.4.3.8). Connections of metal ducts and inner core of flexible ducts must be mechanically fastened. Openings must be sealed with
mastic, tape, or other duct -closure system that meets the applicable requirements of UL 181, UL 181A, or UL 1818 or aerosol sealant that
meets the requirements of UL 723. If mastic or tape is used to seal openings greater than'% inch, the combination of mastic and either mesh or
tape must be used. Building cavities, support platforms for air handlers, and plenums designed or constructed with materials other than sealed
sheet metal, duct board or flexible duct must not W used for conveying conditioned air. Building cavities and support platforms may contain
ducts. Ducts installed in cavities and support platforms must not be compressed to cause reductions in the cross -sectional area of the ducts.'
Factory -Fabricated Duct Systems. Factory -fabricated duct systems must comply with applicable requirements for duct construction,
§ 150.0(m)2:
connections, and closures; joints and seams of duct systems and their components must not be sealed with cloth back rubber adhesive duct
tapes unless such tape is used in combination with mastic and draw bands.
§ 150.0(m)3:
Field -Fabricated Duct Systems. Field -fabricated duct systems must comply with applicable requirements for: pressure -sensitive tapes,
mastics, sealants, and other requirements sped ied for duct construction.
§ 150.0(m)7:
Backdraft Dampers. All fan systems that exchange air between the conditioned space and the outside of the building must have backdraft or
automatic dampers.
§ 150.0(m)8:
Gravity Ventilation Dampers. Gravity ventilating systems serving conditioned space must have either automatic or readily accessible,
manually operated dampers in all openings to the outside, except combustion inlet and outlet air openings and elevator shaft vents,
Protection of Insulation. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance, and
§ 150.0(m)9:
wind. Insulation exposed to weather must be suitable for outdoor service. For example, protected by aluminum, sheet metal, painted canvas, or
plastic cover. Cellular foam insulation must be protected as above or painted with a coating that is water retardant and provides shielding from
solar radiation.
§ 150.0(m)10:
Porous Inner Core Flex Duct. Porous inner core Flex duct must have a non -porous layer between the inner core and outer vapor barrier.
Duct System Sealing and Leakage Test. When space conditioning systems use forced air duct systems to supply conditioned air to an
§ 150.0(m)11:
occupiable space, the ducts must be sealed and duct leakage tested, as confirmed through field verification and diagnostic testing, in
accordance with § 150.0 m 11 and Reference Residential Appendix RA3.
Air Filtration. Mechanical systems that supply air to an occupiable space through ductwork exceeding 10 feet in length and through a thermal
§ 150.0(m)12:
conditioning component, except evaporative coolers, must be provided with air filter devices that meet the design, installation, efficiency,
pressure drop, and labeling requirements of § 150.0 m 12.
2016 Low -Rise Residential Mandatory Measures Summary
Duct System Sizing and Air Filter Grille Sizing. Space conditioning systems that use forced air ducts to supply cooling to an occupiable
space must have a hole for the placement of a static pressure probe (HSPP), or a permanently installed static pressure probe (PSPP) in the
§ 150.0(m)13:
supply plenum. The space copitioning system must also demonstrate airflow ? 350 CFM per ton of nominal cooling capacity through the return
grilles, and an air -handling unit fan efficacy s 0.58 WICFM as confirmed by field verification and diagnostic testing, in accordance with
Reference Residential Appendix RA3.3. This applies to both single zone central forced air systems and every zone for zonally controlled central
forced airs stems.'
Ventilation for Indoor Air Quality. All dwelling units must meet the requirements of ASHRAE Standard 62.2. Neither window operation nor
§150.0(o):
continuous operation of central forced air system air handlers used in central fan integrated ventilation systems are permissible methods of
providing whole -building ventilation.
§ 150.0(o)1A:
Field Verification and Diagnostic Testing. Whole -building ventilation airflow must be confirmed through field verification and diagnostic
testing, in accordance with Reference Residential Appendix RA3,7.
Pool and Spa Systems and Equipment Measures:
Certification by Manufacturers. Any pool or spa heating system or equipment must be certified to have all of the following: a thermal efficiency
§ 110.4(a),
that complies with the Appliance Efficiency Regulations; an on -off switch mounted outside of the healer that allows shutting off the heater
Without adjusting the thermostat setting; a permanent weatherproof plate or card with operating instructions; and must not use electric
resistance heating.*
§ 110.4(b)1:
Piping. Any pool or spa heating equipment must be installed with at least 36 inches of pipe between the filter and the heater, or dedicated
suction and return lines, or built-in or built-up connections to allow for future solar heating.
§ 110.4(b)2:
Covers. Outdoor pools or spas that have a heat pump or gas heater must have a cover.
§ 110.4(b)3:
Directional inlets and time switches for pools. Pools must have directional inlets that adequately mix the pool water, and a time switch that
will allow all pumps to be set or programmed to run only during off-peak electric demand periods.
§ 110.5:
Pilot Light. Natural gas pool and spa heaters must not have a continuously burning pilot light.
150,0
§ (p)'
Pool Systems and Equipment Installation. Residential pool systems or equipment must meet the specified requirements for pump sizing, flow
rate, piping, filters, and valves'
Lighting Measures:
§ 110 9:
Lighting Controls and Components. All lighting control devices and systems, ballasts, and luminaires must meet the applicable requirements
of § 110.9.,
§ 110.9(e):
JAB High Efficacy Light Sources. To qualify as a JAB high efficacy light source for compliance with § 150.0(k), a residential light source must
be certified to the Energy Commission according to Reference Joint Appendix JAB.
§ 150.0(k)IA:
Luminaire Efficacy. All installed luminaires must be high efficacy in accordance with TABLE 150.0-A.
Blank Electrical Boxes. The number of electrical boxes that are more than 5 feet above the finished floor and do not contain a luminaire or
§ 150.0(k)1 B:
other device must be no greater than the number of bedrooms. These electrical boxes must be served by a dimmer, vacancy sensor control, or
fan speed control.
Recessed Downlight Luminaires in Ceilings. Luminaires recessed into ceilings must meet all of the requirements for: insulation contact (IC)
§ 150.0(k)1 C:
labeling; air leakage; sealing; maintenance; and socket and light source as described in § 150.0(k)1C. A JA8-2016-E light source rated for
elevated temperature must be installed by final inspection in all recessed downli ht luminaires in ceilings.
§ 150.0(k)1 D:
Electronic Ballasts. Ballasts for fluorescent lamps rated 13 watts or greater must be electronic and must have an output frequency no less than
20 kHz.
Night Lights. Permanently installed night lights and night lights integral to installed luminaires or exhaust fans must be rated to consume no
§ 150.0(k)1 E:
more than 5 watts of power per luminaire or exhaust fan as determined in accordance with § 130,0(c). Night lights do not need to be controlled
by vacangy sensors.
§ 150.0(k)1 F:
Lighting Integral to Exhaust Fans. Lighting integral to exhaust fans (except when installed by the manufacturer in kitchen exhaust hoods)
must meet the applicable requirements of § 150.0(k).'
Screw based luminaires. Screw based luminaires must not be recessed downlight luminaires in ceilings and must contain lamps that comply
§ 150.0(k)1 G:
with Reference Joint Appendix JAB. Installed lamps must be marked with "JA8-2016" or "JAB-2016-E" as specified in Reference Joint Appendix
JAB.'
§ 150.0(k)1 H:
Enclosed Luminaires. Light sources installed in enclosed luminaires must be JAB compliant and must be marked with "JA8-2016-E."
§ 150.0(k)2A:
Interior Switches and Controls. All forward phase cut dimmers used with LED light sources must comply with NEMA SSL 7A.
§ 150.0(k)2B:
Interior Switches and Controls. Exhaust fans must be switched separately from lighting systems.'
§ 150.0(k)2C:
Interior Switches and Controls. Luminaires must be switched with readily accessible controls that permit the luminaires to be manually
switched ON and OFF.
§ 150.0(k)20:
Interior Switches and Controls. Controls and equipment must be installed in accordance with manufacturer's instructions.
§ 150.0(k)2E:
Interior Switches and Controls. No control must bypass a dimmer or vacancy sensor function if the control is installed to comply with
150.0(k).
§ 150.0(k)2F:
Interior Switches and Controls. Lighting controls must comply with the applicable requirements of § I W.9,
Interior Switches and Controls. An energy management control system (EMCS) may be used to comply with dimmer requirements if it:
§ 150.0(k)2G:
functions as a dimmer according to § 110.9; meets the Installation Certificate requirements of § 130.4; meets the EMCS requirements of §
130,5 ; and meets all other requirements in § 150.0(k)2.
Interior Switches and Controls. An EMCS may be used to comply with vacancy sensor requirements in § 150.0(k) if it meets all of the
§ 150,0(k)2H:
following: it functions as a vacancy sensor according to § 110.9; the Installation Certificate requirements of § 130.4; the EMCS requirements of §
130.5 ; and all other requirements in § 150.0(k)2.
§ 150.0(k)21:
Interior Switches and Controls. A mulliscene programmable controller may be used to comply with dimmer requirements in § 150.0(k) if it
provides the functionality of a dimmer according to § 110.9, and complies with all other applicable requirements in § 150.0(k)2.
"y w
2016 Low -Rise Residential Mandatory Measures Summary
§ 150.0(k)2J:
Interior Switches and Controls. In bathrooms, garages, laundry rooms, and utility rooms, at least one luminaire in each of these spaces must
be controlled by a vacancy sensor,
§ 150.0(k)2K:
Interior Switches and Controls. Dimmers or vacancy sensors must control all luminaires required to have light sources compliant with
Reference Joint Appendix JAB, except luminaires in closets less than 70 square feet and luminaires in hallways.'
§ 150.0(k)2L:
Interior Switches and Controls. Undercabinet lighting must be switched separately from other lighting systems.
Residential Outdoor Lighting. For single-family residential buildings, outdoor lighting permanently mounted to a residential building, or to other
§ 150.0(k)3A:
buildings on the same lot, must meet the requirement in item § 150.0(k)3Ai (ON and OFF switch) and the requirements in either item
§ 150.0(k)3Aii (photocell and motion sensor) or item § 150.0(k)3AR (photo control and automatic time switch control, astronomical time clock, or
EMCS.
Residential Outdoor Lighting, For low-rise multifamily residential buildings, outdoor lighting for private patios, entrances, balconies,
§ 150.0(k)3B:
and porches; and outdoor lighting for residential parking lots and residential carports with less than eight vehicles per site must comply with
either § 150.0 k 3A or with the applicable req uirements in §§ 110.9.130.0.130.2,130A,140.7 and 141.0.
§ 150,0(k)KC
Residential Outdoor Lighting. For low-rise residential buildings with four or more dwelling units, outdoor lighting not regulated by
150.0 k 38 or § 150.0 k 3D must comply with the applicable re uirements in 110.9,130.0,130.2,130.4,140.7 and 141.0.
§ 150.0(k)3D:
Residential Outdoor Lighting. Outdoor lighting for residential parking lots and residential carports with a total of eight or more
vehicles per site must comply with the applicable re uirements in §J 110.9,130.0. 130.2,130.4,140.7, and 141.0.
§ 150,0(k)4:
Internally illuminated address signs. Internally illuminated address signs must comply with § 140.8; or must consume no more than 5 watts of
power as determined according to § 130.0(c).
§ 150.0(k)5:
Residential Garages for Eight or More Vehicles. Lighting for residential parking garages for eight or more vehicles must comply with the
applicable requirements for nonresidential Rarages in §§ 110.9,130.0,130.1,130.4,140.6, and 141.0.
Interior Common Areas of Low-rise Multi -Family Residential Buildings, In a low-rise multifamily residential building where the total interior
§ 150.0(k)6A:
common area in a single building equals 20 percent or less of the floor area, permanently installed lighting for the inferior common areas in that
building must be high efficacy luminaires and controlled by an occupant sensor.
Interior Common Areas of Low-rise Multi -Family Residential Buildings. In a low-rise multifamily residential building where the total interior
common area in a single building equals more than 20 percent of the floor area, permanently installed lighting in that building must:
§ 150,0(k)6B:
I. Comply with the applicable requirements in §§ 110.9,130.0,130.1,140.6 and 141.0; and
ii. Lighting installed in corridors and stairwells must be controlled by occupant sensors that reduce the lighting power in each space by at least
50 percent. The occupant sensors must be capable of turning the light fully on and off from all designed paths of ingress and a ress.
Solar Ready Buildings:
Single Family Residences. Single family residences located in subdivisions with ten or more single family residences and where the
§ 110.10(a)1:
application for a tentative subdivision map for the residences has been deemed complete by the enforcement agency must comply with the
requirements of § 110.10 b through § 110.10 e .
§ 110.10(a)2:
Low-rise Multi -family Buildings. Low-rise multi -family buildings must comply with the requirements of § 110.10(b) through § 110.10(d).
Minimum Area. The solar zone must have a minimum total area as described below. The solar zone must comply with access, pathway, smoke
ventilation, and spacing requirements as specified in Title 24, Part 9 or other Parts of Title 24 or in any requirements adopted by a local
jurisdiction. The solar zone total area must be comprised of areas that have no dimension less than 5 feet and are no less than 80 square feet
each for buildings with roof areas less than or equal to 10,000 square feet or no less than 160 square feet each for buildings with roof areas
§ 110,10(b)l:
greater than 10,000 square feet.
For single family residences the solar zone must be located on the roof or overhang of the building and have a total area no less than 250
square feet. For low-rise multi -family buildings the solar zone must be located on the roof or overhang of the building, or on the roof or overhang
of another structure located within 250 feet of the building, or on covered parking installed with the building project, and have a total area no less
than 15 Rercent of the total roof area of the building excluding any skylight area.'
§ 110.10(b)2:
Orientation. All sections of the solar zone located on steep -sloped roofs must be oriented between 110 degrees and 270 degrees of true north.
§ 110.W(b)3A:
Shading. The solar zone must not contain any obstructions, including but not limited to: vents, chimneys, architectural features, and roof
mounted equipment.'
Shading. Any obstruction located on the roof or any other part of the building that projects above a solar zone must be located at least twice the
§ 110.10(b)3B:
distance, measured in the horizontal plane, of the height difference between the highest point of the obstruction and the horizontal projection of
the nearest point of the solar zone, measured in the vertical lane.'
§ 110.10(b)4:
Structural Design Loads on Construction Documents. For areas of the roof designated as solar zone, the structural design loads for roof
dead load and roof live load must be clearly indicated on the construction documents.
Interconnection Pathways. The construction documents must indicate: a location for inverters and metering equipment and a pathway for
§ 110.10(c):
routing of conduit from the solar zone to the point of interconnection with the electrical service (for single family residences the point of
interconnection will be the main service panel); and a pathway for routing of plumbing from the solar zone to the water -heating system,
§ 110.10(d):
Documentation, A copy of the construction documents or a comparable document indicating the information from § 110.10(b) through
110.10 c must be provided to the occupant.
§ 110.10(e)1:
Main Electrical Service Panel. The main electrical service panel must have a minimum busbar rating of 200 amps.
Main Electrical Service Panel. The main electrical service panel must have a reserved space to allow for the installation of a double pole circuit
§ 110.10(e)2:
breaker for a future solar electric installation. The reserved space must be: positioned at the opposite (load) end from the input feeder location or
main circuit location; and permanently marked as "For Future Solar Electric".