HomeMy WebLinkAboutOutdoor Dining Design Guidelines July 29 2021
OUTDOOR DINING DECK DESIGN GUIDELINES
JULY 29, 2021
OUTDOOR DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 2
TABLE OF CONTENTS PAGE
1.0 BACKGROUND ........................................................................................ 3
2.0 APPROVAL AND REVIEW STANDARDS ................................................ 3
3.0 SAFETY CRITERIA .................................................................................. 4
3.1 Street Design Criteria: Where are Dining Decks Allowed .............. 5
3.2 Barrier Design ............................................................................... 5
3.2.1 Parallel Parking Area Protection .................................................... 6
3.2.2 Angled Parking Area Protection..................................................... 6-7
3.2.3 Dining Deck Signage/Markings...................................................... 8
3.3 Platform Threshold Design ............................................................ 8
3.4 Drainage Design ............................................................................ 9
3.5 Accessibility ................................................................................... 10-11
4.0 AESTHETIC AND CONSTRUCTION GUIDELINES ................................. 12
4.1 Deck Construction Standards ........................................................ 12-13
4.2 Aesthetic Standards ...................................................................... 14
4.2.1 Vertical Elements .......................................................................... 14-16
4.2.2 Plant Material ................................................................................ 17
4.2.3 Deck Materials ............................................................................... 17
4.2.4 Overhead Covers .......................................................................... 17-20
4.2.4 Lighting .......................................................................................... 21-22
5.0 TEMPORARY USE PERMIT APPLICATION ............................................ 23-25
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 3
1.0 BACKGROUND
In response to COVID-19, the State of California, similar to many other States throughout
the country, implemented various procedures to mitigate the effects of the pandemic. Some
of these procedures included restriction or closure of indoor activities, limited capacity in
closed buildings, and the introduction of more outdoor dining. Many cities were faced with
varying challenges, including the need to dedicate public space for the use of outdoor
activities.
The City of Palm Desert has taken an approach that allows outdoor dining through their
“Outdoor Dining Deck” program. These extensions of the walkway allow for enhancement of
the pedestrian environment, which can help make the street feel safer and more
comfortable for people shopping, running errands, and accessing services in the City.
Typically, a Dining Deck is a built platform that extends out from the sidewalk to the width of
the adjacent parking space. These decks can be used for an expanded dining area or an
area to re-route pedestrian travel around expanded outdoor dining on the public sidewalk.
These guidelines are intended to be a “living document” due to the rapid development of
this program. The City of Palm Desert is focused on safety, accessibility, and drainage in
the design of these decks. As new regulations and developments occur, these guidelines
will undergo periodic revisions.
2.0 APPROVAL AND REVIEW STANDARDS
All dining decks must submit a Temporary Use Permit (TUP) Application for review and
approval with the City’s Development Services Department. All submittals are to be
prepared under the direction of and stamped by a licensed Architect or Engineer.
Applicants shall submit drawings, construction methods, site plans, and identify materials
used in their dining deck design. Once received, City staff will review the TUP application
and submitted materials for compliance with the Dining Deck Guidelines.
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 4
3.0 SAFETY CRITERIA
Many factors go into selecting whether or not a business can implement a Dining Deck;
however, these factors are routed in the general public’s welfare and safety while
maintaining the ability for safe and efficient motoring. In addition, accessibility and drainage
are two other key considerations. As time progresses, the City of Palm Desert maintains a
progressive approach as to how to implement this program. This section documents what
businesses can take advantage of the Dining Deck program. The City intends to allow this
to continue beyond the COVID-19 restrictions and going forward into the future. Many
aspects have to be reviewed, as there are many departments of the City that must be
involved.
Planning/Engineering
The Planning/Engineering Division implements the policies and objectives of the community
that are set forth in the City of Palm Desert’s General Plan, Zoning Ordinance, and Specific
Plans. The Planning/Engineering Division also reviews new development proposals to
ensure that the City’s design and development standards, and goals and policies are
executed in the development of the City.
Building and Safety
The Building and Safety Division is dedicated to providing the highest level of code
compliance, inspection services, and plan review to every architect, engineer, developer,
contractor, business, and property owner that resides or works within our community. The
Division strives to demonstrate fairness, equality, and the highest standard of professional
ethics in providing our services while enforcing state construction laws and local ordinances
that protect our citizens. The City of Palm Desert adopted its first building code in 1973.
Public Works
The Public Works Department is responsible for the planning, design, construction,
operation, and maintenance of the City’s infrastructure including, streets, sidewalks, storm
drains, traffic signals, and landscaping. The department also oversees graffiti removal,
engineering review of land development plans, and implementation of City-funded
improvement projects.
Each of the above-listed departments has a vested interest in the development of the Dining
Decks. Each business must submit a Temporary Use Permit application should they wish
to participate in the program, and a copy of the permit has been attached in the appendices
of this document. In addition, the application can be obtained from the City of Palm Desert’s
website.
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 5
3.1 STREET DESIGN CRITERIA – WHERE ARE DINING DECKS ALLOWED
In order to maintain safety of both the pedestrian as well as the motoring public, the City of
Palm Desert has determined certain criteria in which they will allow dining decks. Below is
a summary of the minimum requirements.
Table 1: Dining Deck Selection Criteria
3.2 Barrier Design
The City of Palm Desert has committed to the safety of its pedestrians and motoring traffic,
and for this reason, Dining Decks shall be protected using standard K-Rail available from
construction supply businesses. These barriers can be composed of concrete or durable
plastic materials intended to be filled with water to provide a solid barrier between the
vehicular traffic and the dining decks. K-Rail are sometimes referred to as Jersey Barriers.
At a minimum, barriers must be 36-42 inches high; not easily moved, altered, or stolen;
stable and sturdy enough not to fall over or be pushed over (must withstand 250lbs of
force).
Allowed
Will need to be
reviewed on a case-
by-case basis
Prohibited
25 mph Roadway X
30 mph (and over)
Roadway X
Red Zones X
Red Zones by Fire
Hydrants X
Yellow Zones X
White Zones X
Green Zones X
Travel Lanes X
Within 40’ of a Corner
(Measured from
BCR/ECR)
X
At an Intersection (i.e.
Tee Iintersection) X
Parking Lane of 8’ or
More X
Parking Lane under 8’ X
Angled Parking Stalls X
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 6
3.2.1 PARALLEL PARKING AREA PROTECTION
In order to eliminate a blunt edge, the City of Palm Desert is recommending that an
approximate 10-foot-long transition be created using K-Rail on the approach side of the
dining deck. Parallel to the travel lanes, between the deck and the travel lane, a solid K-Rail
barrier shall be provided. On the departure side of the deck, a single K-Rail shall be placed
in order to prevent cars from backing up during a parking maneuver from colliding with the
deck. As an additional safeguard, a parking wheel stop shall be provided, 4 feet from the
last K-rail to further protect the dining deck from someone backing up into a parking stall. It
is also an option to provide this on the approach side of the dining deck.
3.2.2 ANGLED PARKING AREA PROTECTION
Similar to the parallel parking area Dining Deck, the use of K-Rail shall be implemented to
protect Dining Decks placed in angled parking stalls. Since these areas tend to have a
greater depth, the decks should be placed at the end of the stall and outside of the traveled
way. A conceptual layout has been provided in Figure 1.
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 7
Figure 1: Dining Deck Parking Area Protection
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 8
3.2.3 DINING DECK SIGNAGE/MARKINGS
Dining decks should include a Type E Flexible Base Delineator on the upstream and
downstream side of the k-rail. In addition, a single white reflective tab shall be placed in the
middle of each k-rail parallel to the path of travel. The tab shall be installed such that
vehicles approaching can see the tab.
3.3 PLATFORM THRESHOLD DESIGN
The Dining Deck platform serves as the foundation
for the outdoor space and, as such, must be
designed of durable materials that can withstand
inclement weather and handle the wear and tear of
the elements and regular pedestrian traffic.
The platform deck shall be designed in accordance
with appropriate ADA and California Building Code
Chapter 11B. As such, the City of Palm Desert
recommends that the platform shall be level with the
existing sidewalk (or within ¼” ) and a gap no larger
than ½” exists between the curb face and the
proposed deck. Any vertical difference over ¼” shall
be beveled with a 1:4 (25%) slope.
Platforms shall not be bolted to the existing
pavement or concrete improvements. If bolting is
proposed, the City shall work with the applicant to
obtain appropriate payments for future improvement
replacement.
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 9
3.4 DRAINAGE DESIGN
In general, most Dining Decks are constructed against an existing curb and gutter, and such
local drainage should be taken into account. Impeding of the flow of surface water could
cause ponding and potential flooding of the deck creating a hazard for pedestrians and the
motoring public. As such, a 6” x 6” minimum clear gutter space must be provided along the
entire length of the Dining Deck adjacent to the curb. Openings at either ends may be
covered with screens to prevent debris buildup underneath the deck and in the gutter.
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 10
3.5 ACCESSIBILITY
Dining decks shall be designed in accordance with current American’s with Disabilities Act
and Chapter 11B of the California Building Code.
SAMPLE DINING DECK
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 11
SAMPLE DINING DECKS
(https://www.giffelswebster.com/dining-platforms-and-parklets-in-parking-spaces/)
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 12
4.0 AESTHETIC AND CONSTRUCTION GUIDELINES
The intent of the aesthetic and construction guidelines for outdoor dining decks is to
establish design and construction methods that will result in decks that are both safe and
aesthetically pleasing for the public.
The aesthetic and construction guidelines are outlining a minimum standard and are not
intended to stifle creativity. All submittals will be reviewed on a case-by-case basis, and will
be deemed acceptable (or not acceptable) based on architectural merit, safety, and
compliance with these design guidelines.
Dining decks are meant to provide additional outdoor seating options for patrons and add
another layer of interest to the street scene.
4.1 DECK CONSTRUCTION STANDARDS
Decks may use one of the following construction methods:
OPTION 1:
A 2x4, 2x6, or 2x8 pressure treated wood covered with a 5/8” minimum marine grade
plywood subfloor. The plywood is to be screwed, not nailed, into the 2x members. The finish
may be a non-slip tile or an outdoor carpet. An adequate street drainage system needs to
be provided adjacent to the curb. This could be either an open space or metal tube below
the deck, or wood framing adjacent to the curb could be raised off the street high enough to
allow for stormwater to pass underneath it. See Diagram 1 below.
Diagram 1
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 13
Ideally, the top of the deck would be at the same elevation as the top of the curb for an easy
transition. This is preferred and encouraged. If the deck is at the same elevation as the
curb, provide a suitable metal threshold. See Diagram 2 below.
Diagram 2
Please refer to the Safety Guidelines for more detailed information about thresholds. If the
deck is above the height of the curb, a code-compliant handicap-accessible ramp must be
provided. All exposed deck edges are to be clad in a 2x wood material with a metal angle
on the edge (see Diagram 3 below), or be totally clad in metal and finished with a paint color
that meets with City staff approval.
DIAGRAM 3
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 14
OPTION 2:
Brick pavers over a sand sub-base, over gravel, over two layers of 3 mil visqueen. The top
of the brick pavers are to be flush with the top of the curb. The edges of the deck, other than
on the curb side, are to be finished with a steel angle or plate. Corners of the steel edging
may be connected with steel angles (on the inside) and bolts. The visqueen should extend
up the inside vertical face of the edges, except on the curb side. Street drainage is to be
provided with a plate steel tube adjacent to the curb. The top of the tube is to be flush with
the top of the pavers and the top of the curb. This can also be designed so that the top
piece is removable plate steel that drops into place. See Diagram 4 below.
DIAGRAM 4
4.2 AESTHETIC STANDARDS
4.2.1 VERTICAL ELEMENTS
As outlined in the Safety Criteria, K-rail or water-filled barricades shall provide the base for
the vertical elements. These barriers shall be covered with acceptable materials so that they
are not visible.
Acceptable cover materials include, but are not limited to metal, ceramic tile, stone,
cementitious products, etc. Some of these materials may be applied over a boxed out sub-
frame that fits over the K-rail, or water-filled barriers (see Diagram 5 below). Unlike Diagram
5 however, it is preferred that the entire barrier is covered with the finish material. The
acceptability of any material is subject to review. This is because different materials have
various levels of quality and attractiveness. They also can be applied in a variety of ways,
some of which may be more attractive than others.
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 15
The following vertical barrier materials would generally not be deemed acceptable: Vinyl
pickets or lattice work, painted wood pickets, plastic sheets, fabrics.
DIAGRAM 5
Other possible vertical barrier options are 3-dimensional plate steel forms that could be
exposed or clad with an acceptable finish material. These forms could be filled with soil and
plant material with an appropriate drainage system to serve as a weighted barrier. Another
option for these plate steel forms would be to fill them with gravel to a certain level and then
top them off with tightly spaced plants in pots or plastic containers. The containers would
need to be hidden below the top edge of the form so that only the plant material is visible.
See Diagrams 6 & 7 below.
DIAGRAM 6
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 16
DIAGRAM 7
Other “heavy” elements could be considered on a case-by-case basis, such as concrete
forms (see Diagram 8 below) or large pots filled with soil.
DIAGRAM 8
The small openings between solid barriers may be permitted. These openings would need
to be separated from the street with horizontal cable rail, steel dowels, or some other
material that is deemed aesthetically attractive and acceptable by Staff. This material
cannot have any space large enough to allow a 4” sphere to pass through (see Diagram
9). Material selections and methods of application will be reviewed by Planning Staff.
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 17
DIAGRAM 9
4.2.2 PLANT MATERIAL
Plant material is highly encouraged and recommended. Plant material could be natural or
artificial and would be subject to approval by City Staff.
4.2.3 DECK MATERIALS
Brick pavers and framed plywood decks covered with non-slip tile or outdoor carpeting are
acceptable.
Note, tiles and outdoor carpeting are acceptable as a material; however, it will be reviewed
on an individual basis for aesthetic acceptability. Artificial turf is not acceptable.
4.2.4 OVERHEAD COVERS
Extremely long, continuous covers are discouraged. Covers should be broken up to provide
a more “playful” composition and aesthetic quality.
Overhead Covers may consist of the following:
1. Portable umbrellas of a style and color that is deemed to be acceptable by City Staff.
See Diagram 10 below.
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 18
DIAGRAM 10
2. Engineered umbrellas that require a fixed engineered base. See Diagram 11 below.
DIAGRAM 11
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 19
3. Engineered canvas covers that are connected to the building or to trees. Connection
methods need to be engineered and clearly illustrated to determine aesthetic
acceptability. See Diagram 12 below.
DIAGRAM 12
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 20
4. Pre-engineered canvas covers with metal poles of a style and color that is deemed
to be acceptable by City Staff. See Diagram 13 below.
Metal poles would need to be secured by bolting into the deck base, or providing
aesthetically acceptable concrete piers. Sandbags are not acceptable.
DIAGRAM 13
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 21
4.2.5 LIGHTING
Lighting may consist of the following:
1. Market style LED lighting which may be strung from nearby trees and/or connected
to poles and/or connected to pre-engineered canvas covers. See Diagram 13 below.
DIAGRAM 13
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 22
2. Lantern style lighting. See Diagram 14 below.
3. Artificial battery operated candles. See Diagram 14 below.
DIAGRAM 14
Lighting should be 3000 to 2700 Kelvin or warmer.
Lighting brightness would be at the discretion of the Planning Staff, but generally, light
sources should not cause an unpleasant glare and especially not to someone that is not in
the deck area.
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 23
5.0 TEMPORARY USE PERMIT (TUP)
City of Palm Desert
Temporary Use Permit
Outdoor Business Expansion Application
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 24
DINING DECK DESIGN GUIDELINES
JULY 29, 2021
Page 25